Email

SALES@GLOBALINDUS.IN

Quick Contact

+91 9978239316

PTFE Machined Components

Properties

  • PTFE Machined Components such as Valves Seat Rings, Roof Packings, Seal Cover, Plug Valve Sleeve, Wedge Rings, ‘O’ Rings, Washers, Bearings, Balls, Bushings, Insulators, Pipe Joints, Guides, Beakers, Pistons Rings, Rider Rings, Hydraulic Earth Mover Seal etc., and all types of components for non lubricated compressors or any PTFE components as per customer’s sample, specification and diagram.
Lined Cross by Global

DIMENSIONAL TABLE

PropertyUnitTest MethodVirgin PTFE25% Glass Filled PTFE15% Glass +5%MoS2 Filled PTFE25% Carbon Filled PTFE15% Graphite Filled PTFE40% Bronze Filled PTFE
PHYSICAL
Densitygm/cm³ASTM D-7922.1 - 2.22.24 - 2.252.23 - 2.242.12 - 2.142.14 - 2.163.1 - 3.2
Water Absorption24 hrs (%)ASTM D-570<0.010.0130.0150.0500
MECHANICAL
Tensile Strengthkgf/cm²ASTM D-638210 - 350125 - 200150 - 220120 - 155150 - 200125 - 150
Elongation of Break%ASTM D-638250 - 400200 - 300220 - 320100 - 150175 - 225100 - 175
Compressive Strengthkgf/cm²ASTM D-69540 - 5075 - 8565 - 7575 - 8565 - 7585 - 100
Compressive Moduluskgf/cm²ASTM D-695400070006000840080008500
Deformation under load
A. 24 Hrs. 23°C 113 kg/cm²%ASTM D-621151112786
B. 2 Hrs. 150°C 113 kg/cm²555050354342
Flexural Strengthkgf/cm²ASTM D-790574250966085
Flexural Moduluskgf/cm²ASTM D-7903500-63001670020000119001100014000
Impact Strength (+20°C)cmkgf/cm²ASTM D-25615111210149
HardnessShore-DASTM D-224052 - 5858 - 6360 - 6560 - 6560 - 6563 - 68
Co-efficient of Friction
A. Dynamic P-7 kg/cm² V-0.5 m/s- - -- - -0.04 - 0.060.5 - 0.540.15 - 0.200.12 - 0.170.11 - 0.160.11 - 0.15
B. Static P-35 kg/cm²0.05 - 0.080.11 - 0.130.08 - 0.010.09 - 0.110.08 - 0.100.08 - 0.10
Brittleness Temp. at Atm. Pressure°C- - --200
THERMAL
Melting Temperature°CASTM D-3418335
Use Temp. at Atm. Pressure°C- - --250 to +260
Thermal Conductivity10-4cal/cm S°cCenco Fitch699131417
ELECTRICAL
Dielectric StrengthKv/mmASTM D-14924121622Conductive

RELATED CONTENT